Both my key fobs on my Chevy truck have the plastic loop that holds
the fob on the key ring. This is how I fixed mine. Maybe it'll
help you.
What's I used:
 |
Small eye screw
|
|
Small drill bit. I used a pin-vice drill
|
|
Glue
|
|
 |
|
1. I used a small pin-vice I had to drill a small hole into the plastic
case of the fob at the location of the broken plastic. Be careful
not to drill into the circuit board inside the fob.
|
 |
2. Add some glue to the tip of the screw eye and screw the
eye screw into the hole.
|
 |
3. When the glue is dried, attached your key ring to the key
fob.
|
 |
  |
 |
|
|
